Skip to content

Tools

  • 4 x 30cm 8mm rods
  • 2 x 28cm 8mm rods
  • pack of 3x14mm wood screws
  • old parts from your printrbot simple
  • E3D hot-end with bowden extruder
  • 3 x 608 bearings
  • 2 x SC8UU slider block
  • 1 x GT2 PULLEY & TIMING BELT
  • 1 x Valje from IKEA
  • 1 x auto level probe LJ12A3-4-Z/BY
  • 2 x 15cm 10x10mm square tube
  • 1 x 6mm metal nut